Traditional water slide decals of the highest quality materials
Made with hot foil metallics and precision satin 4 color printing
A variety of vintage electronics brand logos, generic/specific word sets
Typically gold with black outline, other colors available based on set
**If decal needed is not available, please contact us**
Application Instructions/Tips:
Apply only on a clean surface. Soak the decal in lukewarm water for 5 seconds and let stand for 30 seconds. Position on surface to be mounted and slide paper from under the decal. Smooth with a soft brush being sure to remove any folds or bubbles.
If the decal is applied around volume or tuning controls or areas where rubbing may occur, use a finish coating to prevent damage to the ink.
To apply a decal to an uneven surface, or to blend the decal into the background, use Microscale “Micro-Sol”. To add a gloss, satin or flat protective coat to the decal use one of the Microscale finishing products available at your local hobby shop.
Some furniture finishes contain chemicals that can damage a decal. Make a test application on a similar finish before final application.
Our decal products are guaranteed to be free from defects in material and workmanship. Because of variations in individual installation techniques, no warranty is expressed or implied. A sufficient number of decals are provided on each sheet to allow for testing before final application.
